Skip to the stories
Electric Vehicles

Machina Labs Robots Shape a Volcanic Tacoma Lassen Concept

  • Austin Lott
  • 1,001 views

Machina Labs and CALLUM reworked Tacoma panels into a volcanic-inspired Lassen concept, pointing to small-run metal bodywork without dedicated dies.

Machina Labs Robots Shape a Volcanic Tacoma Lassen Concept

Most of the Toyota Tacoma Lassen concept is still a Tacoma. The interesting part is the sheet metal. Machina Labs teamed up with British design firm CALLUM to rework the hood, front fenders, bedsides and tailgate, and the company says it went from digital design to a customized body in about three weeks. That covers the bodywork only, not the time to build a complete truck. Even so, the timeline matters, because it hints at how quickly a body concept could move from a screen to a physical prototype.

A volcanic look built on a Tacoma

Raised topographic contours and Machina lettering on the Lassen concept hood
Raised hood contours reflect the Lassen concept’s volcanic inspiration. (Photo: Machina Labs)

CALLUM, the design firm co-founded by Ian Callum, drew on the landscape of Lassen Volcanic National Park for the truck’s shape and surface details. The result is a Tacoma that reads as sculpted rather than stamped, with raised contours on the hood that look more like terrain maps than body lines. Here’s the thing: that look is the whole pitch. Lassen is the design story, and the manufacturing process is how the team gets there without a conventional tooling budget.

It’s also worth being clear about what this project is. The truck starts from a Tacoma, but this is a Machina and CALLUM project, not a new Toyota trim. Toyota isn’t selling this as a factory model, and the concept is headed to the LA Auto Show as a demonstration of Rebellis, Machina’s new dedicated automotive brand.

Why robots instead of a die

Lassen concept tailgate with industrial robots in the Machina Labs factory
The finished Lassen concept sits in front of robotic equipment at Machina Labs. (Photo: Machina Labs)

A conventional stamping die earns its cost when you need thousands of identical pieces. Spread that tooling across a small run, or across a shape that keeps changing during development, and the math stops working. That’s the gap Machina is aiming at.

The process works like this. Machina turns a digital design into a toolpath that a robot follows to shape the panel. It can add detail to a factory-stamped panel, a step the company calls restriking, or form a new panel from a flat sheet. Either way, the part still needs finishing before it goes on a truck, so this isn’t a shortcut to a showroom-ready body in one pass.

“We have two robots that are manipulating a sheet of material,” Tim Dine said at a reveal event. That quote captures the basic setup: two arms working one piece of metal, with the shape coming from software rather than a fixed die.

The feedback loop is where I’d expect the real value to sit. For a fully formed replacement panel, the team scans the vehicle’s exterior surfaces, removes panels to scan the surfaces underneath, and sends the resulting digital model to the designer. After forming the new metal panel, it scans that part and compares it with the model. The differences feed the next iteration. In a process like this, speed comes from closing that loop quickly, not from one fast forming pass.

Machina Labs CEO and founder Ed Mehr explained how the parts were made. The Lassen’s hood and tailgate began as stock Tacoma panels, which the company reshaped through restriking. The front fenders and rear bedside panels were formed from flat sheets of metal. That split tells you the process is flexible. Some parts were modified from production stock, while others were built from scratch.

Where this could matter for owners and small shops

Raised Machina lettering formed into the Lassen concept tailgate
The tailgate’s raised Machina lettering shows one way to personalize a metal panel. (Photo: Machina Labs)

For a truck owner, the appeal is obvious. Custom metal panels have traditionally meant either expensive one-offs or aftermarket pieces that don’t quite fit. A process that can rework a stock panel or form a new one from flat stock could open the door to bespoke bodywork without a full tooling run behind it.

A specialty shop could use the approach for a short run of custom panels. An automaker could use it for prototypes, limited editions or replacement parts. The useful insight is that a shop doesn’t need Tacoma-level production volume to make a new panel in metal. That changes who can afford to offer a custom body at all.

Mehr was candid about the range he’s chasing. “Anywhere from tens to few thousand is where we are targeting,” he said. That describes the production volumes Machina wants to serve, not a demonstrated output figure. He also said traditional manufacturing makes more sense once a run reaches hundreds of thousands of vehicles. Between those two ends sits a middle ground where designers could offer limited editions of familiar truck platforms. My read is that this middle ground is where the business case lives, and it’s a niche that big stamping operations have never bothered to chase.

What isn’t settled yet

Rear view of the Toyota Tacoma Lassen concept showing its custom tailgate and bedsides
Machina has not announced pricing or an on-sale date for the Lassen bodywork. (Photo: Machina Labs)

Don’t go looking for a price tag or a order page yet. Machina hasn’t announced pricing or a firm on-sale date for the Lassen or a Tacoma body kit. Mehr said he hopes to put 10 trucks into customers’ hands in 2027 as a pilot. That’s a company goal, not a confirmed consumer launch, and it’s the kind of target that can slip.

“I’m hoping we can get to a point where we can maybe put 10 trucks in the market next year to pilot this,” Mehr said. He also described work with automakers and other partners on software that could let customers customize designs, potentially at a dealership. If that idea takes shape, the dealership becomes the place where a buyer picks a design and the robots do the rest. Pricing, ordering details and a firm timetable remain open questions.

Watch the LA Auto Show for how Rebellis presents itself, and watch whether the pilot count holds. The bigger question is whether the three-week design-to-body timeline survives contact with real customers who want changes, repairs and warranty coverage. That’s where a clever manufacturing process either becomes a product or stays a showpiece.

Source: Austin Lott · pickuptrucktalk.com

Neighbouring cells